View MRF9060LR1_319832.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Freescale Semiconductor Technical Data
MRF9060 Rev. 8, 12/2004
RF Power Field Effect Transistors
N-Channel Enhancement-Mode Lateral MOSFETs
Designed for broadband commercial and industrial applications with frequencies up to 1000 MHz. The high gain and broadband performance of these devices make them ideal for large-signal, common-source amplifier applications in 26 volt base station equipment. * Typical Two-Tone Performance at 945 MHz, 26 Volts Output Power -- 60 Watts PEP Power Gain -- 17 dB Efficiency -- 40% IMD -- -31 dBc
www..com
MRF9060LR1 MRF9060LSR1
* Integrated ESD Protection * Designed for Maximum Gain and Insertion Phase Flatness * Capable of Handling 10:1 VSWR, @ 26 Vdc, 945 MHz, 60 Watts CW Output Power * Excellent Thermal Stability * Characterized with Series Equivalent Large-Signal Impedance Parameters * In Tape and Reel. R1 Suffix = 500 Units per 32 mm, 13 inch Reel. * Low Gold Plating Thickness on Leads. L Suffix Indicates 40 Nominal.
945 MHz, 60 W, 26 V LATERAL N-CHANNEL BROADBAND RF POWER MOSFETs
CASE 360B-05, STYLE 1 NI-360 MRF9060LR1
CASE 360C-05, STYLE 1 NI-360S MRF9060LSR1
Table 1. Maximum Ratings
Rating Drain-Source Voltage Gate-Source Voltage Total Device Dissipation @ TC = 25C Derate above 25C MRF9060LR1 MRF9060LSR1 Storage Temperature Range Operating Junction Temperature Tstg TJ Symbol VDSS VGS PD Value -0.5, +65 -0.5, + 15 159 0.91 219 1.25 -65 to +150 200 Unit Vdc Vdc W W/C W W/C C C
Table 2. Thermal Characteristics
Characteristic Thermal Resistance, Junction to Case MRF9060LR1 MRF9060LSR1 Symbol RJC Value 1.1 0.8 Unit C/W
Table 3. ESD Protection Characteristics
Test Conditions Human Body Model Machine Model Class 1 (Minimum) M1 (Minimum)
NOTE - CAUTION - MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed.
(c) Freescale Semiconductor, Inc., 2004. All rights reserved.
MRF9060LR1 MRF9060LSR1 5-1
RF Device Data Freescale Semiconductor
Table 4. Electrical Characteristics (TC = 25C unless otherwise noted)
Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 65 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 26 Vdc, VGS = 0 Vdc) Gate-Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 200 Adc) Gate www..com Quiescent Voltage (VDS = 26 Vdc, ID = 450 mAdc) Drain-Source On-Voltage (VGS = 10 Vdc, ID = 1.3 Adc) Forward Transconductance (VDS = 10 Vdc, ID = 4 Adc) Dynamic Characteristics Input Capacitance (VDS = 26 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Output Capacitance (VDS = 26 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Reverse Transfer Capacitance (VDS = 26 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Ciss Coss Crss -- -- -- 98 50 2 -- -- -- pF pF pF (continued) VGS(th) VGS(Q) VDS(on) gfs 2 -- -- -- 2.9 3.7 0.17 5.3 4 -- 0.4 -- Vdc Vdc Vdc S IDSS IDSS IGSS -- -- -- -- -- -- 10 1 1 Adc Adc Adc Symbol Min Typ Max Unit
MRF9060LR1 MRF9060LSR1 5-2 RF Device Data Freescale Semiconductor
Table 4. Electrical Characteristics (TC = 25C unless otherwise noted) (continued)
Characteristic Functional Tests (In Freescale Test Fixture, 50 ohm system) Two-Tone Common-Source Amplifier Power Gain (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 945.0 MHz, f2 = 945.1 MHz) Two-Tone Drain Efficiency (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 945.0 MHz, f2 = 945.1 MHz) 3rd Order Intermodulation Distortion (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 945.0 MHz, f2 = 945.1 MHz) Input Return Loss (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, www..com f1 = 945.0 MHz, f2 = 945.1 MHz) Two-Tone Common-Source Amplifier Power Gain (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 930.0 MHz, f2 = 930.1 MHz and f1 = 960.0 MHz, f2 = 960.1 MHz) Two-Tone Drain Efficiency (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 930.0 MHz, f2 = 930.1 MHz and f1 = 960.0 MHz, f2 = 960.1 MHz) 3rd Order Intermodulation Distortion (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 930.0 MHz, f2 = 930.1 MHz and f1 = 960.0 MHz, f2 = 960.1 MHz) Input Return Loss (VDD = 26 Vdc, Pout = 60 W PEP, IDQ = 450 mA, f1 = 930.0 MHz, f2 = 930.1 MHz and f1 = 960.0 MHz, f2 = 960.1 MHz) Power Output, 1 dB Compression Point (VDD = 26 Vdc, Pout = 60 W CW, IDQ = 450 mA, f1 = 945.0 MHz) Common-Source Amplifier Power Gain (VDD = 26 Vdc, Pout = 60 W CW, IDQ = 450 mA, f1 = 945.0 MHz) Drain Efficiency (VDD = 26 Vdc, Pout = 60 W CW, IDQ = 450 mA, f1 = 945.0 MHz) Output Mismatch Stress (VDD = 26 Vdc, Pout = 60 W CW, IDQ = 450 mA, f = 945.0 MHz, VSWR = 10:1, All Phase Angles at Frequency of Tests) Gps 16 17 -- dB Symbol Min Typ Max Unit
36
40
--
%
IMD
--
-31
-28
dBc
IRL
--
-16
-9
dB
Gps
--
17
--
dB
--
39
--
%
IMD
--
-31
--
dBc
IRL
--
-16
--
dB
P1dB
--
70
--
W
Gps
--
17
--
dB
--
51
--
%
No Degradation In Output Power
MRF9060LR1 MRF9060LSR1 RF Device Data Freescale Semiconductor 5-3
VGG C6 RF INPUT
B1 + C7 L1 C4 Z1 C1 Z2 Z3 Z4 C2 Z5 Z6 Z7 C3 Z8 C5 Z9 Z10 DUT C9 Z11 Z12 Z13 L2
B2 C13 + C15 + C16 + C17
VDD
Z14
Z15
Z16 C14
Z17
RF OUTPUT
C8
C10
C11
C12
www..com
Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 Z9
0.240 x 0.060 Microstrip 0.240 x 0.060 Microstrip 0.500 x 0.100 Microstrip 0.180 x 0.270 Microstrip 0.350 x 0.270 Microstrip 0.270 x 0.520 x 0.140 Taper 0.170 x 0.520 Microstrip 0.410 x 0.520 Microstrip 0.060 x 0.520 Microstrip
Z10 Z11 Z12 Z13 Z14 Z15 Z16 Z17 PCB
0.360 x 0.270 Microstrip 0.060 x 0.270 Microstrip 0.110 x 0.060 Microstrip 0.330 x 0.060 Microstrip 0.230 x 0.060 Microstrip 0.740 x 0.060 Microstrip 0.130 x 0.060 Microstrip 0.340 x 0.060 Microstrip Taconic RF-35-0300, 30 mil, r = 3.55
Figure 1. 945 MHz Broadband Test Circuit Schematic
Table 5. 945 MHz Broadband Test Circuit Component Designations and Values
Part B1 B2 C1, C7, C13, C14 C2, C3, C11 C4, C5, C8, C9 C6, C15, C16 C10 C12 C17 L1, L2 N1, N2 WB1, WB2 Short Ferrite Bead Long Ferrite Bead 47 pF Chip Capacitors 0.8-8.0 Gigatrim Variable Capacitors 10 pF Chip Capacitors 10 mF, 35 V Tantalum Chip Capacitor 3.0 pF Chip Capacitor 0.5 pF Chip Capacitor (MRF9060) 0.7 pF Chip Capacitor (MRF9060S) 220 mF Electrolytic Chip Capacitor 12.5 nH Inductors N-Type Panel Mount, Stripline 10 mil Brass Wear Blocks Description 95F786 95F787 100B470JP 500X 44F3360 100B100JP 500X 93F2975 100B3R0JP 500X 100B0R5BP 500X 100B0R7BP 500X 14F185 A04T-5 3052-1648-10 Part Number Manufacturer Newark Newark ATC Newark ATC Newark ATC ATC ATC Newark Coilcraft Avnet
MRF9060LR1 MRF9060LSR1 5-4 RF Device Data Freescale Semiconductor
C6 VDD C7 B2 C13 L1 INPUT C1 C2 C3 C4 WB1 CUT OUT AREA C5 WB2 C8 C9 L2 C15 C16
C17
VGG
B1
C14 C10 C11 C12
OUTPUT
www..com
MRF9060 900 MHz Rev-02
Freescale has begun the transition of marking Printed Circuit Boards (PCBs) with the Freescale Semiconductor signature/logo. PCBs may have either Motorola or Freescale markings during the transition period. These changes will have no impact on form, fit or function of the current product.
Figure 2. 930 - 960 MHz Broadband Test Circuit Component Layout
MRF9060LR1 MRF9060LSR1 RF Device Data Freescale Semiconductor 5-5
TYPICAL CHARACTERISTICS
h , DRAIN EFFICIENCY (%) IMD, INTERMODULATION DISTORTION (dBc) -10 -12 -14 -16 -18 18 17 G ps , POWER GAIN (dB) 16 15 14 13 12 11 www..com 10 930 IRL IMD Gps h VDD = 26 Vdc Pout = 60 W (PEP) IDQ = 450 mA Two-Tone Measurement, 100 kHz Tone Spacing 50 45 40 35 -30 -32 -34 -36 935 940 945 950 f, FREQUENCY (MHz) 955 -38 960
Figure 3. Class AB Broadband Circuit Performance
IDQ = 650 mA 500 mA
IMD, INTERMODULATION DISTORTION (dBc)
18 17.5 G ps , POWER GAIN (dB) 17 16.5 16
-20 -25 -30 -35 -40 -45 -50 -55 -60 450 mA 650 mA 500 mA VDD = 26 Vdc f1 = 945 MHz f2 = 945.1 MHz 100 IDQ = 275 mA
450 mA
275 mA 15.5 15 1
VDD = 26 Vdc f1 = 945 MHz f2 = 945.1 MHz 10 100 Pout, OUTPUT POWER (WATTS) PEP
1 10 Pout, OUTPUT POWER (WATTS) PEP
Figure 4. Power Gain versus Output Power
Figure 5. Intermodulation Distortion versus Output Power
0 IMD, INTERMODULATION DISTORTION (dBc) -10 -20 -30 -40 -50 -60 -70 0.1 5th Order 7th Order 100 3rd Order VDD = 26 Vdc IDQ = 450 mA f1 = 945 MHz f2 = 945.1 MHz
IRL, INPUT RETURN LOSS (dB)
20 18 Gps, POWER GAIN (dB) 16 14 12 10 8 10 Pout, OUTPUT POWER (WATTS) AVG. VDD = 26 Vdc IDQ = 450 mA f = 945 MHz 100 h Gps
60 50 40 30 20 10 0 h, DRAIN EFFICIENCY (%)
1 10 Pout, OUTPUT POWER (WATTS) PEP
Figure 6. Intermodulation Distortion Products versus Output Power MRF9060LR1 MRF9060LSR1 5-6
Figure 7. Power Gain and Efficiency versus Output Power
RF Device Data Freescale Semiconductor
TYPICAL CHARACTERISTICS
Gps h, DRAIN EFFICIENCY (%) IMD, INTERMODULATION DISTORTION (dBc) 18 16 Gps, POWER GAIN (dB) 14 h 12 10 8 www..com 6 IMD 1 10 Pout, OUTPUT POWER (WATTS) PEP 100 VDD = 26 Vdc IDQ = 450 mA f1 = 945 MHz f2 = 945.1 MHz 60 40 20 0 -20 -40 -60
Figure 8. Power Gain, Efficiency, and IMD versus Output Power
MRF9060LR1 MRF9060LSR1 RF Device Data Freescale Semiconductor 5-7
www..com
Zo = 5
Zsource f = 930 MHz f = 960 MHz
Zload f = 960 MHz
f = 930 MHz
VDD = 26 V, IDQ = 450 mA, Pout = 60 W PEP f MHz 930 945 960 Zsource 0.80 - j0.10 0.80 - j0.05 0.81 - j0.10 Zload 2.08 - j0.65 2.07 - j0.38 2.04 - j0.37
Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground. Device Under Test Output Matching Network
Input Matching Network
Z
source
Z
load
Figure 9. Series Equivalent Source and Load Impedance
MRF9060LR1 MRF9060LSR1 5-8 RF Device Data Freescale Semiconductor
NOTES
www..com
MRF9060LR1 MRF9060LSR1 RF Device Data Freescale Semiconductor 5-9
NOTES
www..com
MRF9060LR1 MRF9060LSR1 5-10 RF Device Data Freescale Semiconductor
PACKAGE DIMENSIONS
2X
B
G
1
Q aaa
M
TA
M
B
M
3 (FLANGE) 2X
NOTES: 1. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. INCHES MIN MAX 0.795 0.805 0.225 0.235 0.125 0.175 0.210 0.220 0.055 0.065 0.004 0.006 0.562 BSC 0.077 0.087 0.220 0.250 0.355 0.365 0.357 0.363 0.125 0.135 0.227 0.233 0.225 0.235 0.005 REF 0.010 REF 0.015 REF MILLIMETERS MIN MAX 20.19 20.45 5.72 5.97 3.18 4.45 5.33 5.59 1.40 1.65 0.10 0.15 14.28 BSC 1.96 2.21 5.59 6.35 9.02 9.27 9.07 9.22 3.18 3.43 5.77 5.92 5.72 5.97 0.13 REF 0.25 REF 0.38 REF
B
2
D bbb M T A
2X M
K
(LID)
B
M
R
ccc www..com E N ccc
M
M
TA
M
B
M
(LID)
TA C
M
B
M
H
F
(INSULATOR)
S
T
(INSULATOR)
SEATING PLANE
aaa TA
M
M
TA
M
B
M
DIM A B C D E F G H K M N Q R S aaa bbb ccc
M
bbb
M
B
M
STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE
A
A
CASE 360B-05 ISSUE F NI-360 MRF9060LR1
A B
(FLANGE)
A
1 NOTES: 1. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M-1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. (LID)
(FLANGE)
B
2 2X
D
M
2X
K
M
bbb
TA
M
B
R
(LID)
N
ccc
M
M
TA
M
B F
M
ccc E
TA
M
B
M
H
C PIN 3 bbb
M
(INSULATOR)
S
(INSULATOR)
M
T
M
SEATING PLANE M
aaa
M
TA
M
B
M
DIM A B C D E F H K M N R S aaa bbb ccc
INCHES MIN MAX 0.375 0.385 0.225 0.235 0.105 0.155 0.210 0.220 0.035 0.045 0.004 0.006 0.067 0.057 0.085 0.115 0.355 0.365 0.357 0.363 0.227 0.23 0.225 0.235 0.005 REF 0.010 REF 0.015 REF
MILLIMETERS MIN MAX 9.53 9.78 5.72 5.97 2.67 3.94 5.33 5.59 0.89 1.14 0.10 0.15 1.70 1.45 2.16 2.92 9.02 9.27 9.07 9.22 5.77 5.92 5.72 5.97 0.13 REF 0.25 REF 0.38 REF
TA
B
CASE 360C-05 ISSUE D NI-360S MRF9060LSR1
STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE
MRF9060LR1 MRF9060LSR1 RF Device Data Freescale Semiconductor 5-11
www..com
How to Reach Us:
Home Page: www.freescale.com E-mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 LDCForFreescaleSemiconductor@hibbertgroup.com
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2004. All rights reserved.
MRF9060LR1 MRF9060LSR1
Document Number: MRF9060 Rev. 8, 12/2004
5-12
RF Device Data Freescale Semiconductor

▲Up To Search▲

Price & Availability of MRF9060LR1

	To Download MRF9060LR1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .